0
ISO 9001 certified copper-nickel composite strip, built for consistent batch quality. Copper core for low resistance, nickel cladding for clean welds and corrosion protection — custom per drawing, no grade designation. SGS inspection support, low MOQ to start.
This ISO 9001 certified copper-nickel composite strip is built for consistent batch quality — copper core for low electrical resistance, nickel cladding for weldability and corrosion protection, custom per drawing. No grade designation applies; the construction is the specification. Clad ratio, layers and surface are held uniform from coil to coil, verified per batch and documented with every delivery.
| Parameter | Value | Note |
|---|---|---|
| Construction | Copper core, nickel cladding | single or double-side, per drawing |
| Clad ratio | Per drawing | confirmed at order |
| Thickness | Per drawing | core + cladding layers |
| Width / length | Per drawing | strip form, per order |
| Tolerances | Per drawing | locked at order confirmation |
MOQ and exact tolerances are confirmed per drawing.
ISO 9001 certified production — certified quality system, plant-wide.
Batch consistency — uniform clad ratio, layers and surface from coil to coil.
Dual-metal benefit — copper core for low resistance, nickel cladding for weldability and corrosion protection.
Custom per drawing — clad ratio, thickness, width and length confirmed at order.
Documented deliveries — per-batch inspection records and EN 10204 3.1 material certificates.
| Item | Scope |
|---|---|
| ISO9001 | Quality management system, plant-wide |
| SGS | Third-party inspection support |
| EN 10204 3.1 MTC | Material test certificate with each shipment |
| Per-batch inspection | Dimensions, layers, surface against the drawing |
| Layer | Role |
|---|---|
| Copper core | Low electrical resistance, current carrying |
| Nickel cladding | Corrosion resistance, weldable surface |
| Clad ratio | Confirmed per drawing |
Construction (single or double-side cladding), clad ratio, thickness, width, length and surface finish are all manufactured per drawing. Share the application and the drawing, and we confirm the strip specification before production.
Consistency is the product. Clad ratio, layer thickness and surface condition are held uniform from coil to coil, verified per batch and recorded against the drawing — so what you specify in the first order is what you receive in the tenth.
Typical use: battery tab connections, electronic connectors, terminals and current-carrying joints. Grade-free construction per drawing gives design freedom across these duties.
Pricing & Quotation
This composite carries no grade designation and is quoted per drawing, based on construction (single or double-side cladding), clad ratio, dimensions and quantity. No indicative price range is published for this product — request a quotation with your drawing for a firm price.
| Core material | Copper |
| Cladding material | Nickel |
| Cladding | Single or double-side, per drawing |
| Clad ratio | Per drawing |
| Composition record | Per-batch inspection per drawing |
Physical properties (density, electrical conductivity, tensile strength) depend on the core/clad ratio and layer thickness. Values are confirmed per drawing — no catalogue values are claimed for this composite.
| Form | Composite strip (Cu core, Ni cladding) |
| Grade | None (construction per drawing) |
| Size | Per drawing |
| Surface | Clean, oxide-free per drawing |
| Lead time | 7-15 days |
| Packaging | Export packaging per order |
Per-batch inspection against the drawing (dimensions, layers, surface)
Traceability records for every batch
EN 10204 3.1 material test certificate available on request
ISO9001 quality-system control across production
| Dimensional tolerances | Per drawing |
| Nickel cladding family (where applicable) | ASTM B162 (Ni200/Ni201 strip); GB/T 2072-2020 (N4/N6 strip) |
| Composite verification | Per drawing, per-batch inspection |
Packaging & Delivery
Strip is packaged for export with edge and surface protection. Lead time: 7-15 days. Shipping documents and inspection records accompany every shipment.
DZX started in 2002 with resistance alloys; two decades later, the same plant supplies Inconel, Monel, Hastelloy and nickel-based products to 60+ countries. Jiangsu DZX Technology Co., Ltd. brings that history to every composite strip order — 50+ patents behind the process, 2000+ partners trusting the output, and ISO9001/SGS quality control on the line.
A: Production runs under an ISO9001 quality system with SGS inspection support, and EN 10204 3.1 material test certificates are available with shipment.
A: Clad ratio, layer thickness and surface condition are held uniform from coil to coil, verified per batch and recorded against the drawing.
A: No — no grade designation applies. The specification is the construction: copper core, nickel cladding, clad ratio and dimensions, all per drawing.
A: Construction (single or double-side cladding), clad ratio, thickness, width, length and surface finish, all per drawing.
A: MOQ is confirmed per drawing; samples available on request (shipping at customer's cost). Lead time: 7-15 days.
E-mail: dzx@dlx-alloy.com
Mobile: +8619906119641
Tel: 0086-19906119641
WhatsApp: +86-19906119641
Add: NO.32 West Taihu Road, Xinbei District, Changzhou, Jiangsu
